Car Steering wheel round the Same – Steering wheel car is one of the components in the car to control the car. Seeing this important function, as the owner, it is necessary to ensure that the component conditions are always optimal at all times. However, what happens if the car’s steering wheel is not the same?
In the problem of the steering wheel, besides the problem of heavy steering, there is also a problem with unequal rotation. An example of the damage would be like this. When you turn left, you only need one turn of the wheel. Meanwhile, when you turn right, it takes two turns of the steering wheel. Then you can see the difference from the number of turns when turning.
The cause of the car’s steering wheel is not the same
If you have this, then you need to immediately find out what caused this to happen. For the following, you can see the reviews below:
Ever Replace Car Steering Components
The cause of the steering wheel of the car is not the same, the first is because you have replaced components. There are several car components that really affect the turning angle of the car, such as the tie road and rack steer.
If you have ever replaced one of the components mentioned above, then that is likely the cause. With the very nature of having an influence on car maneuverability, it is better to immediately check with the garage before there is a bigger problem.
This problem will be bigger for you if the product you install is fake. So you only need to count the time until this problem occurs. This is why you need to use the original product from the car factory so that quality and work are guaranteed.
Using Products Not According To Specifications
There are other causes that can trigger this problem to occur, namely using products that are not according to default standards. Even though the shape looks the same, the difference itself can be felt. Includes different steering wheel turning angles.
Checking the Steering Steering Components
Apart from the two causes above, you can also worry about the condition of the components installed. You can check the stopper or the turning radius setting. It is located under the front chassis, near the pitman arm. If the iron is broken and bent, this could be one of the causes.
In addition, you can also check the left and right tie roads. If this component is bent, it is better to check it immediately. Take your car to the trusted workshop or authorized repair shop closest to your house. This is because the rotation of the car’s steering wheel is a big enough problem, therefore you need to find a trusted repair shop. Hope it is useful.